SKU: 82458675015

Copper-filled PLA based filament MetalFil - Classic Copper 2.85mm 1500 gram Natural Composite 3D Printer Filament

Sale price$119.22 Regular price$132.47
Save 10%

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 12 - Jul 17

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

Copper-filled PLA based filament MetalFil - Classic Copper 2.85mm 1500 gram Natural Composite 3D Printer FilamentFormfutura MetalFil Classic Copper is a composite PLA (polylactic acid) filament that is gravimetrically filled with approximately 80% copper powder. The high copper content in MetalFil Classic Copper makes 3D printed objects nearly indistinguishable from genuine copper casted objects. MetalFil Classic Copper can be post processed with various patina effects. Unique features Very high copper filling of 80% Real copper look, heavyweight, and cold

Formfutura MetalFil Classic Copper is a composite PLA (polylactic acid) filament that is gravimetrically filled with approximately 80% copper powder. The high copper content in MetalFil Classic Copper makes 3D printed objects nearly indistinguishable from genuine copper casted objects. MetalFil Classic Copper can be post-processed with various patina effects.

 

Unique features

  • Very high copper-filling of 80%
  • Real copper look, heavyweight, and “cold” copper metal feel
  • Approximately 300% heavier than PLA (density of 3.4 g/cc)
  • MetalFil can be brushed, sanded, polished, waxed, coated and patina post-processed
  • Compatible with full metal, PEEK, and PFTE hotends
  • Compatible with direct drive and Bowden style extruders
  • Compatible with ≥ 0.4mm hardened nozzles with retraction settings enabled
  • Easy to post-process

Applications

  • Aesthetics, design, and art
  • Figurines and miniatures

General printing guidelines *

Nozzle size: ≥ 0.4mm

Layer height: ≥ 0.2mm

Experience level: Beginner

Print temp: ± 215 - 235° C *

Fan speed: 50-100%

 

Heat bed: ± 0 - 60° C

Enclosure needed: No

 

*) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There is a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting.

*) If blobs/lumps form around the nozzle then your print temperature is too high.

Post processing MetalFil - Classic Copper

Brushing and/or sand grinding

Once printed MetalFil - Classic Copper objects can very easily be brushed with a brass brush or sanded with fine-grit sandpaper. By brushing and/or sand grinding your printed object you will brush/shine up the high concentration of copper powders.

Build-in white polish feature

After being brushed and/or sanded MetalFil - Classic Copper will reveal its white polish feature. A very thin white layer/haze on your object will now allow you to easily polish your 3D print into a beautiful copper object.

Professional polishing with a rotary tumbler

Post-processing a MetalFil - Classic Copper 3D printed object with a rotary tumbler will make your FDM 3D printed object indistinguishable from genuine copper casted objects.

Patina post-processing

You can create several patina effects on MetalFil - Classic Copper printed objects in just one day time. With an ammonia and soda treatment you can for instance easily create a beautiful ancient green/blue weathering effect on your copper object.

Waxing and coating

After every above-mentioned post-processing measure, you can always wax or coat your printed object to get an incredible shine effect. Waxing can be done with products such as beeswax and for coating one can think about products such as XTC-3D.

Abrasiveness

Please be aware that MetalFil filaments contain a very high concentration of metal powders, which have an abrasive nature. In general, these metal powders will accelerate the nozzle-wear of brass nozzles, much faster than unfilled filaments. We recommend using nozzles from stainless steel or other hardened alloys.

Filament length

ρ: 3.4 g/cc

50 gr coil

0.75 Kg spool

1.5 Kg spool

Ø 1.75mm

± 6.1m

± 92m

± 183m

Ø 2.85mm

± 2.3m

± 35m

± 69m

 

Nozzle cleaning

When printing with filled/composite filaments it is recommended to clean your nozzle immediately after printing by feeding 15-20cm PLA filament through your nozzle. This will make sure that any potential fillers are flown out of your nozzle. It is even better to use glow in the dark PLA as the extremely hard phosphorous particles are much more likely to scrape out residual waste from your nozzle.

 

Product export information

HS Code: 39169090

Description: Monofilament

Country of origin: the Netherlands

 

Compliance *

This filament is compliant with the below-listed directives and regulations.

  • RoHS directive 2011/65/EC
  • REACH directive 1907/2006/EC

*) This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above-described products.

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 82458675015

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.0 ★★★★★
Based on 265 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
N
Verified Purchase
Nibi
Carnegie, US
★★★★★ 5
Good shelf
Color: Black, Size: 24 inches
Lightweight shelves. Easy to assemble
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 12, 2026
K
Verified Purchase
Keisha
Carnegie, US
★★★★★ 4
Sturdy
Color: White, Size: 15 inches, Color: White, Size: 15 inches
Love the shelves. Nice touch to my bathroom. Easy enough to install. They're not holding anything too heavy so can't speak too much on that but they do have a nice width.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 30, 2026
K
Verified Purchase
Kaitlynn
Draper, US
★★★★★ 5
Good for light stuff
Color: Black, Size: 15 inches, Color: Black, Size: 15 inches
Good product. Very light though and if it’s in dry wall won’t hold something really heavy. I don’t think it would hold 20 pounds just light. I put over my washer and dryer and put one right on top that way I can put heavy stuff on that side without it weighing down and being ripped out of the wall. I won’t be putting heavy stuff on the right side I used 4 pieces and the wall is about 60-62 inches long
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 5, 2025
R
Verified Purchase
Reviewer
Houston, US
★★★★★ 5
Perfect sized floating shelves
Color: Black, Size: 24 inches, Color: Black, Size: 24 inches
These are great and the perfect width. I had my contractor install them because my tile had to have a hole drilled into it. I love that it looks seemless and flat to the tile. New bathroom renovation. I am very pleased. Holds a few towels also candles and a little plant with extra space. Perfect for a minimal look or if you have a small bathroom. Color was spot on.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 30, 2026
R
Verified Purchase
R. Fleming
Waukegan, US
★★★★★ 3
Not What I Expected
Color: White, Size: 32 inches
This set of floating shelves was a disappointment. They’re advertised as holding 20 pounds, but mine began to bend with barely 10 pounds on them. All the screws and anchors were installed tightly and correctly, yet the metal brackets still warped under minimal weight. The shelves look fine on the wall, but I’m leaving them up only because I don’t want to patch a dozen holes—not because they’re sturdy. Definitely not the quality or strength I expected.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 13, 2026

recommand products