Full-Race 2021+ Ford F-150 & Raptor 3.5L EcoBoost Formline Turbo Manifolds+120 WHP. +151 WTQ. 100% Bolt On. Our Formline Turbo Manifolds for the 2021+ F 150 and Raptor 3. 5L EcoBoost replace restrictive OEM castings with precision engineered 347 stainless steel, improving flow, turbo response, and long term durability while retaining OEM fitment and emissions compliance. NEXT GEN POWER, PROVEN FORMLINE ENGINEERING. FULL RACE FORMLINE TURBO MANIFOLDS FOR THE GEN3 3. 5L ECOBOOST. Fords third generation 3. 5L EcoBoost is the
+120 WHP. +151 WTQ. 100% Bolt-On. Our Formline® Turbo Manifolds for the 2021+ F-150 and Raptor 3.5L EcoBoost replace restrictive OEM castings with precision-engineered 347 stainless steel, improving flow, turbo response, and long-term durability while retaining OEM fitment and emissions compliance.
NEXT-GEN POWER, PROVEN FORMLINE® ENGINEERING.
FULL-RACE FORMLINE® TURBO MANIFOLDS FOR THE GEN3 3.5L ECOBOOST.
Ford’s third-generation 3.5L EcoBoost is the strongest and most advanced yet, but even this refined engine has one leftover weak link: the exhaust manifolds. Built for cost efficiency, the stock castings are known to warp, crack, and restrict flow once heat and boost rise.
That’s why we built the Full-Race Formline® Turbo Manifolds for the 2021+ F-150 and Raptor. Designed from the ground up for the GEN3 EcoBoost 3.5L, these manifolds fix the factory flaws with the same proven approach we’ve used across previous generations: stronger materials, smarter geometry, and real-world testing.
Each Formline® manifold is investment-cast from 347 stainless steel, a high-temperature alloy chosen for its strength, heat tolerance, and corrosion resistance. Unlike the factory castings that fatigue over time, 347 stainless holds its shape through countless heat cycles, preventing warping, cracking, and exhaust leaks, even under heavy boost.
But strength is only part of the story. Inside, the Formline® design improves how the GEN3 EcoBoost breathes. Each runner is precisely shaped and balanced to smooth exhaust velocity and reduce backpressure, helping the turbos spool faster and respond more predictably. Additionally, the outlets are port-matched to the 40mm turbo inlets, eliminating pre-turbo restriction and allowing gases to transition cleanly without turbulence or flow loss.
Because every detail was built around the GEN3’s unique architecture, these manifolds also retain compatibility with the factory cooled-EGR system, helping control combustion temps and improve knock resistance under load. Installation is fully bolt-on with no tuning or modifications required, and every kit includes Inconel studs, nuts, and gaskets for a clean, leak-free fit.
The result is smoother power delivery, faster spool-up, and consistent reliability — no matter how you drive.
Whether you’re chasing more power, better longevity, or just peace of mind before your next long haul, the Formline® Manifolds give your EcoBoost a stronger foundation to build on — and the confidence to keep pushing it.
APPLICATION LIST
2021+ Ford F-150 3.5L EcoBoost
2021+ Ford Raptor 3.5L EcoBoost
2021+ Ford F-150 3.5L PowerBoost
FEATURES & BENEFITS
40mm Port-Matched Outlets: +38% larger outlet area for smoother exhaust flow into the turbocharger inlet. OEM outlets measure 34mm; Formline® outlets are precision-matched at 40mm to eliminate pre-turbo restriction and improve spool.
Proven Power & Reliability: Improved flow directly translates to more horsepower, faster spool, and smoother throttle response — with dyno‑proven gains up to +120 WHP / +151 WTQ when tuned.
347 Stainless Steel Construction: Investment-cast from aerospace-grade 347 stainless steel for superior resistance to heat, cracking, and corrosion — even under sustained high-boost conditions (rated to 1740°F / 950°C).
Optimized Flow & Turbo Response: Refined runner geometry and a balanced merge design reduce backpressure and improve exhaust velocity, helping turbos spool quicker while delivering stronger midrange torque and top-end power.
Thicker 15mm Flange Design: Warped flanges are one of the most common causes of exhaust leaks. The Formline® design uses a consistent 15mm (½") flange thickness across the entire manifold — keeping the sealing surface perfectly flat and secure through countless heat cycles.
EGR-Compatible for Knock Resistance: Retains the factory cooled-EGR system (unique to the GEN3 EcoBoost), helping control combustion temps, reduce knock, and maintain consistent performance under load.
Inconel Hardware Kit Included: Includes premium A286 Inconel studs, nuts, and new gaskets for a complete installation. These aerospace-grade fasteners resist fatigue, corrosion, and thermal expansion far beyond OEM hardware.
49-State Emissions Compliant: SEMA Certified for EPA compliance — proven through lab testing to meet federal emissions standards in 49 states (excluding California).
Direct Bolt-On Fitment: Installs easily using factory mounting points. No cutting, drilling, or custom fabrication required.
Compatible with OEM & Upgrade Turbos: Engineered to fit both factory and aftermarket turbochargers for future flexibility as your build evolves.
Limited Lifetime Warranty: Built to last and backed by Full-Race’s limited lifetime warranty against manufacturing defects.
Optional Install Kit (Recommended) — Sold Separately: Keep your install simple and leak-free with all-new lines, seals, and service hardware. This is ideal when replacing heat-cycled factory parts during manifold service.
Shipping Notes
Free Standard Shipping on $100+ Orders to the USA.
Except Preorder products are shipped in 48 hours.
Delivery to the USA:
Standard Shipping : 3-10 business days
If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
We offer a 30-day return/exchange service after receiving.
Final sale items are not eligible for returns or exchanges.
To process your return/exchange, please contact us at [email protected]
Super cute comes with a stand perfect to place as a decoration. Comes clean and cured also with instructions on how to take care of its perfect since its my first ever bamboo product. Not too heavy and has non slip things in the bottom for when cutting it doesn’t slip. I 100% recommend not only that it’s very affordable for the quality you might think its expensive because it feels expensive!!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 7, 2026
V
Verified Purchase
Vanessa Adrian-O'Ryan
Dallas, US
★★★★★ 5
Cutting boards
So far so good. Make sure to clean, dry and put away.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 2, 2026
D
Verified Purchase
Deylin
West Palm Beach, US
★★★★★ 5
I like it
Excellent
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 1, 2026
B
Verified Purchase
Bebé
Carnegie, US
★★★★★ 4
Nice does it’s job
Very nice but after a few cuts in it you can see them. Easy cleaning
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 18, 2026
D
Verified Purchase
Dayna
Battle Creek, US
★★★★★ 5
Will buy again !
I recently got this bamboo cutting board set and I’m really happy with it. The set comes with multiple sizes, which makes it super convenient for different tasks—smaller boards for quick prep and larger ones for bigger meals. The built-in grooves are a great touch, helping catch juices and keep the counter clean.
The boards feel sturdy and well-made, but still lightweight enough to handle easily. I also like the natural bamboo look—it adds a nice, clean aesthetic to the kitchen. The included stand is a bonus, keeping everything organized and easy to access.
Overall, this is a practical and stylish set that works great for everyday use. Definitely a solid value and something I’d recommend to anyone looking to upgrade their kitchen essentials.
Promo Codes Available: