Bowers & Wilkins CWM 7.3 S2 In-Wall Speaker (Single)See nothing, hear everything Like having a Floor Standing Speaker hidden in your wall cavity, the CWM7. 3 S2 features an integrated backbox that optimises its performance, cuts down on sound transference through walls and also makes it easy to retrofit. With spray paintable magnetic grilles, these speakers can easily disappear into any room but still provide amazing, accurate sound just as the artist intended. Its design incorporates twin 150mm (6in)

See nothing, hear everything

Like having a Floor-Standing Speaker hidden in your wall cavity, the CWM7.3 S2 features an integrated backbox that optimises its performance, cuts down on sound transference through walls and also makes it easy to retrofit.

With spray-paintable magnetic grilles, these speakers can easily disappear into any room but still provide amazing, accurate sound just as the artist intended.

Its design incorporates twin 150mm (6in) Aerofoil profile bass drivers, a 100mm (4in) Continuum cone FSTTM mid-range driver and a Carbon Dome 25mm (1in) tweeter, all proven technologies shared with the acclaimed 700 Series range of loudspeakers.

These outstanding transducers, when combined with high-quality, optimised, components on the crossover and a critically formed baffle constructed from glass reinforced ABS, produce a truly remarkable in-wall speaker.

These can be used as Left, Centre or Right Channels in a Home Theatre. You could also install two of these as left & right channels in conjunction with a traditional box centre speaker (See Bowers & Wilkins HTM71 S2) 

Ask the friendly Todds HiFi staff how to best incorporate these into your system today.

Technical Specifications

Technical features

Carbon Dome tweeter Continuum cone FST midrange Aerofoil profile bass cones Flowport™

Description

3-way in-wall system Drive units 1x ø25mm (1 in) Carbon Dome high-frequency 1x ø100mm (4 in) Continuum cone FST midrange 2x ø150mm (6 in) Aerofoil profile bass

Frequency range (-6dB) -6dB at 43Hz and 33kHz

Frequency Response -3dB 45Hz - 28kHz ±3dB

Sensitivity 90dB spl (2.83Vrms, 1m)

Harmonic distortion 2nd and 3rd harmonics (90dB, 1m) <1% 80Hz - 33kHz <0.5% 120Hz - 33kHz

Nominal impedance 8Ω (minimum 3.1Ω)

Recommended amplifier power 25W - 200W into 8Ω on unclipped programme

Dimensions

Frame height 736mm (29in)

Frame width 276mm (11in)

Depth (behind surface) 102mm (4.02in)

Cut-out height 711mm (28in)

Cut-out width 251mm (9.9in)

Cut-out height w/PMK 715mm (28.1in)

Cut-out width w/PMK 256mm (10.1in)

Reservoir box height 460mm (18.1in)

Reservoir box width 220mm (8.7in)

Protrusion 7mm (0.28in)

PMK 7.3W

Net weight 12.4kg (27.32lb)

Finishes

Back box: White

Grille: White