SKU: 94562244154

Vultus Obscur Monokijker / Verrekijker - 12x Zoom - Met statief

$62.10 $69.00
Save 10%
No.2 Bestseller on ifjpjournal.org >

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 13 - Jul 18

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

Vultus Obscur Monokijker / Verrekijker - 12x Zoom - Met statiefVind je het leuk om het aanbod van de natuur te verkennen en buiten te zijn? Met behulp van deze Vultus Obscur kom je dichtbij en persoonlijk met je favoriete objecten. Deze Vultus monoculair kan gebruikt worden om een uitgestrekte berg te bekijken of snel bewegende vogels te lokaliseren. Wie graag de wereld rondreist, zal deze monokijker de perfecte keuze vinden, dankzij zijn kleine afmetingen en premium gecoate lens. Er zijn echter nog veel meer

Vind je het leuk om het aanbod van de natuur te verkennen en buiten te zijn? Met behulp van deze Vultus Obscur kom je dichtbij en persoonlijk met je favoriete objecten. Deze Vultus monoculair kan gebruikt worden om een uitgestrekte berg te bekijken of snel bewegende vogels te lokaliseren. Wie graag de wereld rondreist, zal deze monokijker de perfecte keuze vinden, dankzij zijn kleine afmetingen en premium gecoate lens. Er zijn echter nog veel meer voordelen...

Gebruiksvriendelijkheid staat centraal

Niets is irritanter dan een voorwerp in helder zicht hebben en het dan uit het oog verliezen omdat de kijker niet meewerkt. We kwamen soortgelijke problemen tegen, en daarom zijn onze Vultus monokijkers zo gemaakt dat ze heel eenvoudig te gebruiken zijn. Je hoeft je zaakje niet langer uit het oog te verliezen, dankzij de gratis meegeleverde handriem en het stevige statief. Je kunt genieten van uren ononderbroken kijken dankzij de soepel bewegende zoomfunctie.

Andere voordelen:

  • Inzoomen tot in detail met de 12x vergroting – Je kunt voorwerpen tot op 5000 meter afstand benaderen en ze gedetailleerd waarnemen dankzij de aanzienlijke vergroting. Andere monoculairen hebben vaak vergrotingen tot 8x, waardoor verre dingen wazig blijven.
  • Licht en compact design – Deze Vultus Obscur, die 310 gram weegt, is ideaal voor wandelaars, trekkers, en iedereen die wat extra ruimte in zijn zak heeft.
  • 50mm lens – This offers a lot of light, ensuring that the things are clearly seen.
  • Water- en stofdicht – De regenbestendige constructie van de monokijker betekent dat je je geen zorgen hoeft te maken als het regent tijdens je trektocht. Deze monokijker is ook uiterst duurzaam omdat hij stofdicht is. Daardoor kan hij in elk klimaat of elke omgeving gebruikt worden.
  • Double coated lens – De dubbel gecoate lens garandeert een hoge resolutie en een stabiel zicht, zelfs bij mist.
  • ABS materiaal – Omdat ABS een taai en duurzaam materiaal is, wordt het vaak gebruikt voor producten met strenge veiligheidsvoorschriften, zoals motorhelmen en autobumpers. Dit maakt de kijker zeer duurzaam en valbestendig.

Smartphonehouder
Sommige foto's zijn gewoon te mooi om maar één keer te bekijken of om voor jezelf te houden. Je mag daarom foto's maken van alles wat je bekijkt, dankzij de bevestigde smartphone houder. Verbind je smartphone met de houder en de monokijker met de houder. geschikt voor toestellen tot 8,5 centimeter breed, waaronder zowel Android als iPhones. Je mag je herinneringen altijd op deze manier met je maten delen en elke herinnering opslaan.

Handstrap
Bevestig eenvoudig de bijgeleverde handstrap aan de Vultus Obscur, steek je hand erin en profiteer van de extra stijfheid. De extra stabiliteit maakt een eind aan trillingen, want het vasthouden van de camera gaat nu moeiteloos. Deze extra stevigheid maakt het ook zo dat het wisselen tussen voorwerpen eenvoudig is omdat het niet meer nodig is scherp te stellen.

Inclusief draagtas en nekkoord
De monokijker wordt geleverd met een betrouwbare draagkoffer en een gezellig halskoord. Zo kun je hem meteen meenemen nadat je hem snel hebt ingepakt! Deze eigenschappen maken deze monokijker ideaal voor lange wandelingen en reizen. Deze Vultus Obscur is ook heel handig om te bewaren.

Garantie
We werken graag met je samen om oplossingen te vinden voor eventuele problemen die je met deze Vutlus Obscur hebt. Kun je de telescoop om een of andere reden niet gebruiken? De kosten om hem terug te sturen zijn gratis.

Kies vandaag nog voor de kijkers van Vultus en geniet morgen al van het verbreden van jouw horizon!

Vultus. Broaden Your Horizon.
Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 94562244154

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.2 ★★★★★
Based on 1244 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
R
Verified Purchase
ReluctantConsumer
Dallas, US
★★★★★ 5
Creality K1 SE - Prints great with stock settings - needs a side spool mount
Set name: K2 SE, Set name: K2 SE
I bought the Creality K1 SE a little over a week ago. I had an Ender 3 S1 before this printer. The K1 SE is so, so much easier to print with right out of the box! I definitely recommend it. It's a good way to get the improvements that were built into Creality's K1C, but at a nicer price. Plus, you can install your own version of Klipper if you want. I've printed 10 or so things in PLA and PETG, and I haven't had any failed prints. The automatic bed leveling has just worked. I have not had any problems with bed adhesion. On the Ender 3 S1, I only used a textured PEI plate, but the smooth build plate on the K1 SE works fine. The extruder cooling fan also seems ok for what I've printed so far. I printed an overhang test and the 75 degree overhang looks fine, but it had trouble at 80 degrees. The bridging test looked ok. (The longest bridge was only 25 mm on that test however.) I've put the printer in a soft-sided enclosure that I had used for my old Ender 3 S1. (It's easy to find similar encolsures.) The LEDs on the K1 SE are bright enough to see inside which is something that I was concerned about before I purchased. However, this enclosure makes it difficult to access the back of the printer where the filament spool is mounted, so I designed a mount that clamps onto the side-bar - see the pictures. The files are on Printables - "Creality K1 SE Side Spool Mount".
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 21, 2025
G
Verified Purchase
Geoff
Cuba, US
★★★★★ 3
Almost Good
Set name: K2 SE
The nozzle cleaning is completely ineffective. The wiper pushes material up the sides of the nozzle and melts onto the nozzle. The result is the nozzle leaves burnt debris on the prints. The calibration before each print only probes 5 points on the bed and the results are not satisfactory, with the nozzle being variously too close or too far from the bed. To adjust the z offset you have to go through several menus and the machine seems to not remember where you set it last time. Print quality is good except for VFAs. Part cooling fan is very loud at full speed.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 5, 2026
J
Verified Purchase
Joshua McPheron
Boise, US
★★★★★ 5
Assembly Tricks And Tips.
Color: Dark Grey, Size: 5 Seat
All my packages came at same time. Assembly is in 3 phases, each box had the same complete instruction book, but each phase was not completely together in the same box. I immediately started opening boxes and just separated by letters. A's here, B's here. Not all A's or the other letters are the same, but it is very easy to follow the instructions. You won't get it mixed up. 3 hardware kits, it's pretty easy. Picture Book Difficulty :) The one large headboard piece was Letter M. There was no sticker on it, but there were no M stickers either. Pretty easy. It's not a thick grandma's pull-out bed type of couch, but seems sturdy. I probably should have got the 3 year warranty, and I only have one kid. This isn't a couch to front-flip off the island on to, but it is nice and comfy and seems to be worth the cost. Assembly took about 2-3 hours casually I think. I used impact drill. Luckily it's 1 screw head size, then the socket for the nuts basically (provided). Communication with seller was easy and transparent. Idk what else people might be looking for in these reviews. It smelled completely fine. Good purchase. They say to air it out for a while, but I just assembled it immediately it didn't mess up anything. OH! And a little trick for the double sided threaded bolts with no head, they can get stuck hand tightening it so tighten down one of the nuts all the way to the end of the exposed thread that sticks up, and you can thread those bolts that don't have a head WAY easier using the nut as the head. Then just loosen the nut back off of it. You'll understand what I mean. Thank You
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 28, 2026
C
Verified Purchase
Courtney
New York, US
★★★★★ 5
Would buy again!!!
Color: Dark Grey, Size: 7 Seat
⭐️⭐️⭐️⭐️⭐️ Perfect Couch for Comfort, Space, and Style! I couldn’t be happier with my purchase of the SUAWY 108 Inch Sectional Sleeper. From the moment it arrived, I knew I made the right choice. Setup was straightforward, and the couch feels incredibly sturdy and well-built. The fabric is soft to the touch yet durable enough to handle everyday use, which is perfect for both lounging and having guests over. The size is exactly what I was looking for — spacious enough to seat a large group comfortably without feeling cramped. Whether I’m relaxing after work, having friends over, or stretching out for a nap, it provides more than enough room. The chaise and sleeper function are real game changers. The pull-out sleeper is surprisingly supportive and comfortable — not at all like the thin, saggy mattresses I’ve experienced with other sofa beds. My guests have all commented on how well they slept! I also love the storage space built into the sectional. It’s so convenient for keeping extra blankets, pillows, or even board games tucked away neatly. This design makes it feel like the couch was made with real-life use in mind, not just looks. Speaking of looks, the style is modern and clean, and it blends perfectly into my living room. The neutral tone makes it easy to decorate around, and it honestly makes the whole room look more put-together. Overall, this sectional sleeper has completely exceeded my expectations. It’s comfortable, practical, stylish, and worth every penny. If you’re on the fence, don’t hesitate — this is absolutely one of the best furniture investments I’ve made. I’m genuinely so happy every time I sit down on it, and I highly recommend it to anyone looking for a large, versatile sectional.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on September 8, 2025
P
Verified Purchase
patrick
Lexington, US
★★★★★ 4
An okay sectional
Color: Dark Grey, Size: 5 Seat, Color: Dark Grey, Size: 5 Seat
I want to give my honest review of this couch. One significant difference in the actual couch vs the photos here is the back of the couch is actually much thinner than in the photos. It’s made with metal framing that is very thin covered in fabric with no sort of padding. Also, the back of the couch does not angle back far. Which makes the couch pretty uncomfortable, as your back is up at almost a 90 degree angle. The quality of the couch overall is good. It was easy to assemble and I didn’t really run into any issues in that regard. Like others have said. The cushions are quite thin and also not super soft. The couch is also quite low to the ground, so if you’re looking for that oversized super soft couch, this probably isn’t the one. I do love the pull out bed/chaise which is super nice, ans the storage is great too. For the cost of the couch I think the quality and comfort are good. I don’t love it, I don’t hate it.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 8, 2026

recommand products

Oakley Target Line S (Extra small) Matte Black/ Dark Grey
65.00
Oakley Flight Path L (extra large) Factory Pilot Black/ Prizm Sapphire
169.95
Oakley Flight Tracker L Matte Black/ Prizm Sapphire
147.50
SPLASH LOUNGE
21.95
Oakley Flight Deck M Ultra Purple Terrein/ Prizm Garnet
129.95