LED Grow Light IR Full Spectrum Panel 980W ; 10 Light Bar

LED Grow Light IR Full Spectrum Panel 980W ; 10 Light BarParameter Product Size: 104. 5104. 214cm Input Power: 980 W PPF: 2646 umol s CRI: >88 Luminous Efficacy: 2. 7 mol J N. W(KG): 15. 9Kg 35. 05LBS G. W(KG): 17. 9Kg 39. 46LBS Viewing Angle: 110 Input voltage: 100 277vac 50 60hz Amp Draw: 5. 69A@120V 3. 16A@220V 2. 91A@240V 2. 53A@277V Work Temperature: 1040 Power Factor: 0. 9 THD: <20% Driver surge protection: 6kv Dimming: 0 10kv LED type: 3000K+5000K+660nm+730nm Housing: Aluminum alloy Heat Output:

Parameter

• Product Size: 104.5×104.2×14cm
• Input Power: 980 W
• PPF: 2646 umol/s
• CRI: >88
• Luminous Efficacy: 2.7 μmol/J
• N.W(KG): 15.9Kg/35.05LBS
• G.W(KG): 17.9Kg/39.46LBS
• Viewing Angle: 110 °
• Input voltage: 100-277vac 50/60hz
• Amp Draw: 5.69A@120V 3.16A@220V 2.91A@240V 2.53A@277V
• Work Temperature: -10℃～40℃
• Power Factor: ≥ 0.9
• THD: <20%
• Driver surge protection: 6kv
• Dimming: 0-10kv
• LED type: 3000K+5000K+660nm+730nm
• Housing: Aluminum alloy
• Heat Output: 2822btu
• Operating Humidity: 10-90%RH
• Warranty Time: 5years
• Packing Dimension(mm): 1162*245*330mm/ 45.75"*9.65"*12.99"
• Multi-layer: 4-5FT wide benches,4-6 in from canopy
• Room: one fixture per 4FT to 4FT area
• Tent: 4FT to 4FT area to 5FT to 5FT area

Precise Control

• 0-10V dimming control for individual fixture or fixture group dimming control (daisy chain via RJ11 cable)

Application

• Indoor Farming
• Vertical Farming
• Cannabis Cultivation

Features & Benefits

• Constant current driver, durable life
• Full-spectrum, similar to sunlight, higher crop yield
• IP65 waterproof rating, suitable for high humidity application
• 0-10V dimming
• Flicker free
• Suspension and ceiling mounting option, mounting height 6" - 48"
• Application environment: indoor cultivation

WARNING AND CAUTION

• Please read the following instructions carefully before usingthis grow lighting fixture.
• Make sure main power is switched off before connecting the light fixture.
• DO NOT connect or disconnect the LED fixture under load.
• Always allow for a cool down period of at least 30 minutes before touching the LED bars.
• Please DO NOT use this product outdoors.
• Connect the cables according to local lawssafetyregulations and electrical code.
• Mounting and installing of the LED fixture may only be performed by certified service person,in accordance with the applicable local laws and regulations.