CJM Industries Front Chassis Mounted Splitter Gen 2 - Golf R MK7.5 (2018-2021)

CJM Industries Front Chassis Mounted Splitter Gen 2 - Golf R MK7.5 (2018-2021)Made to order 4 5 Week Lead Time Our Gen 2 chassis mounted splitter kit improves on our popular Gen 1 kits. The revised brackets make the intial install process easier. It also reduces the time needed to bolt on, or remove the splitter blade once the kit is mounted. Ideal for easy trailer loading, or daily duty. With 4 8 bolts (depending on the blade & accessories), the splitter blade can be removed from the car without removing the bumper. NOTE: This

Made to order - 4-5 Week Lead Time 

Our Gen 2 chassis mounted splitter kit improves on our popular Gen 1 kits. The revised brackets make the intial install process easier. It also reduces the time needed to bolt on, or remove the splitter blade once the kit is mounted. Ideal for easy trailer loading, or daily duty. With 4-8 bolts (depending on the blade & accessories), the splitter blade can be removed from the car without removing the bumper. 

NOTE: This is NOT a quick release system.

Initially designed in airshaper CFD, and refined based with on-track feedback from our early adopters with Gen 1 kits, our results for tested kits are shown in the table images (bracket kits and street blades were not tested).  

Please review all details in the drop downs below for fitment and install requirements! All sales are final. 
Built in USA. 1 Year manufacturer warranty on failed parts. Wear and tear from rubbing is not covered. 

Bracket Kit
A set of brackets and mounting hardware to build your own blade. DIY to save some cost, or build one for the class you compete in. We can also make custom sized blades if you have dimensions.

1/2" or 3/4" Plywood is a great cheap option because it is rigid and relatively lightweight. Paint it with a stain/sealer and top coat with paint, or use roll on bed-liner.

Street Blade

Think of this as a chassis mounted lip. Extra protection against road debris and snow. Made of 9mm thick poly it is durable, easy to clean and has a light texture that is close to some factory trim.

Mixed Use Blade

These are good for autocross and similar events. This blade is larger than the street option, and comes with predrilled holes to mount the included air dam. These are our most popular kit. They give the car a unique track inspired look, provide some downforce and are still small enough to be street drivable.

Blade Comparison
Each blade has a sightly different shape to match its intended use case.
Our street blades protrude slightly more than our bumper mounted lips.
Mixed-use have a roughly 60mm lip protrusion
Track blades widen at the edges to allow for endplates, tire spats, etc.

Install & Fitment Details
Install requires drilling holes in the impact bar.
Install requires cutting slots in the lower tray of the bumper (no paint matched areas are trimmed). 
Fits 2.0T MQB & some PQ35 vehicles.
The brackets are compatible with factory position upgraded intercoolers.
The brackets are not compatible with any front mount intercooler.