Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 15 - Jul 20
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
Coldline CDD-48 48″ Refrigerated Direct Draw Beer Dispenser with 1 Spout - 11.8 Cu. Ft.Coldline CDD 48 48" Black 2 Tap Refrigerated Direct Draw Beer Dispenser Coldline direct draw beer dispensers hold continuously cooled beer columns with lever faucets. Available in a durable stainless steel with adjustable PVC coated shelves and removable installation boards, these units will meet the needs of any busy beer joint. Each craft beer draw system fits 1 2 size kegs per each storage door. The polished black exterior (stainless steel) gives
Coldline CDD-48 48" Black 2 Tap Refrigerated Direct Draw Beer Dispenser
Coldline direct draw beer dispensers hold continuously cooled beer columns with lever faucets. Available in a durable stainless steel with adjustable PVC coated shelves and removable installation boards, these units will meet the needs of any busy beer joint. Each craft beer draw system fits 1/2 size kegs per each storage door. The polished black exterior (stainless steel) gives it a contemporary stylish edge over competitors, and the high-efficiency refrigeration system maximizes keg beer efficiency. Get more value for money with a Coldline high performance refrigerated beer dispensing system.
Standard Features
- 48" double tap kegerator beer dispenser, (2)1/2 keg capacity
- Black corrosion resistant steel exterior
- Easy to use digital controls
- Brilliant LED interior lighting
- 10.25" faucet height
- Built-in drip tray speeds up cleaning
- Includes (2) "D" system couplers
- Includes 2 easily adjustable/removable shelves
- Stainless steel interior and top
- Self-closing locking doors that stay open past 90 degrees
- Recessed door handles
- Hydro-Carbon R290 refrigerant
- Forced air refrigeration system
- Includes (4) leveling feet
- Foamed-in polyurethane cell insulation
- 110v Plug and Play
More Specification's on https://usrbrands.com/
Specifications
| Manufacturer | Coldline |
| SKU | CDD-48 |
| Length (in.) | 48.9 |
| Depth (in.) | 24.4 |
| Height (in.) | 35.6 |
| Cubic Feet | 12 |
| Volts | 115 |
| Nema Plug | 5-15P |
| Hertz | 60 |
| Phase | 1 |
| Amps | 2 |
| Horsepower | 3/7 HP |
| Interior Material | Stainless Steel |
| Exterior Material | Coated Steel |
| Refrigerant | R290 |
| Shelves | 2 |
| Temperature Range | 33 F to 40 F |
| Number of Sections | 2 Section |
Documents
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.8 ★★★★★
Based on 2370 reviews
Sort
Product Reviews
★★★★★ 4
Large coverage
Size: 1 Pack (24" x 36")
Takes one smudge to dry car.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 29, 2026
★★★★★ 5
Magsafe car mount for a Tesla screen that is easy to adjust and holds the phone very well
Style: MagSafe Car Phone Holder, Style: MagSafe Car Phone Holder
I installed this mount on my 2018 Tesla Model 3 main display and it was easy to install - just loosen the wheels on the top and side clamp, put it in place and then tighten the clamps back down. There is a ball mount on the back which tightens as well that allows you to position and angle the phone mount so you can tilt it up or down or towards the driver. You can adjust the phone on the mount to where you want it - although the bar that holds the phone will hit the clamps in two spots so there are a couple of positions that don't work due to the design, but overall you can more or less put the phone where you want and and then tilt it any which way to you.
The magnet connection is very firm but the phone also detaches relatively easily. The clamps so far are holding well on the screen. I really don't have a lot of complaints - except maybe that there's a couple of positions that don't work. It works well, installs quickly and easily and seems to hold well in use. I've had no problems so ar.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 25, 2025
★★★★★ 4
Mostly reliable to use
Style: MagSafe Car Phone Holder
It's nice to use in my car to separate out different needs like looking up a specific route while moving and the navigation is going somewhere. The magnet is pretty strong and haven't had any issues with that. However, if you dont put it in the corner of the screen to secure it at a right angle, the flat way to secure it in the middle of the top edge is not reliable at all. The weight of the phone and the angle of the mount makes it really easy to fall off the screen no matter how tight you secure it down. Fell at least a handful of times. Just put it at the corners and you'll be just fine.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 29, 2025
★★★★★ 2
Does not fit the Cybertruck. Will slip off due to angled backplate.
Style: MagSafe Car Phone Holder, Style: MagSafe Car Phone Holder
It does not fit the Cybertruck well. Due to the angled monitor back, it will slide off. Check the video of what I mean. It is not flat like the Model 3 or Ys.
The mount should work fine on the Model 3 and Model Y and Newer Model S and X, but not on the Cybertruck and older vertical screen Model S and X.
The Magsafe that I received must of been broken. It completely fell apart. Everytime I put on phone on it, the Magsafe will completely come off stuck to my phone.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 30, 2025
★★★★★ 3
Looks good, installs easily but the arm jitters on the road
Style: MagSafe Car Phone Holder, Style: MagSafe Car Phone Holder
Super easy and intuitive to install on my Tesla model 3. Once installed, I think it will probably hold position indefinitely. You can install it so that it is in a very convenient position. my right hand index finger was able to touch the screen of my phone while maintaining contact with the handle, so that should give you an idea. The reason I took 2 stars off is the way the goose neck jitters when driving. I think perhaps it is too thin. I drove on normal paved road, and the shakes were noticeable. It didn’t fall off at any point, but it made me nervous that it might. The magnet didn’t feel that strong either. A lot of people own phones larger and heavier than mine (iPhone 12 mini), so I’m reluctant to recommend.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 26, 2025
recommand products
Omron E2E2X10MC1M1 NSNP ** GENUINE ** 1224VDC E2E2 X10MC1 M1
50.10
Banner Engineering BMP.753P / 21101 NSNP ** GENUINE **
49.50
Square D 8501DO22V02 NSNP **GENUINE** SD 8501 DO22 V02
90.00
Banner Engineering 16411 / PT200 NSFP ** GENUINE ** PT 200
31.00
Square D 8501GDO60 115V NSFP **GENUINE** SD 8501 GDO 60
92.70