44WM70-5L-A37 GrassFlap® brand chute blocker with Steel Blocker Plate and 5L pedal Includes Wright No-Drill Mount for 2019 or older

44WM70-5L-A37 GrassFlap® brand chute blocker with Steel Blocker Plate and 5L pedal Includes Wright No-Drill Mount for 2019 or olderGrassFlap brand chute blocker with Steel Blocker Plate and 5L pedal Includes Wright No Drill Mount for 2019 or older The GrassFlap brand chute blocker is the ideal OCDC, operator controlled discharge chute. The foot operation allows the user to close the discharge chute at any time, any place without taking their hands off the mowers controls. The chute blocker plate opens a full 180 degrees and completely clears the edge of the mower to allow the

GrassFlap® brand chute blocker with Steel Blocker Plate and 5L pedal Includes Wright No-Drill Mount for 2019 or older

The GrassFlap® brand chute blocker is the ideal OCDC, operator controlled discharge chute. The foot-operation allows the user to close the discharge chute at any time, any place without taking their hands off the mower€™s controls. The chute blocker plate opens a full 180 degrees and completely clears the edge of the mower to allow the mower to fit in those tight spaces. 

 CHECK THE DECK RIB DESIGN BEFORE ORDERING. REQUIRES AEROCORE DECK WITH SCALLOPED RIB FOR DIRECT BOLT.  WILL WORK ON STANDER B MODELS WITH 48" AND LARGER DECKS.

OPTION: Use on AEROCORE DECK WITH STRAIGHT RIB BY DRILLING HOLE IN RIB. The benefit is you eliminate drilling holes in the deck and it provides a consistent location

To verify this model fits your specific mower, please use the GrassFlap® Lookup

 Features

• Hands-Free operation
• All steel blocker plate
• Direct bolt-on for mowers with scalloped rib
• Opens 180 degrees to completely clears edge of deck
• No handles or levers to get hung on limbs and shrubs
• Most Drop-on baggers will fit with GrassFlap® brand chute blocker installed

What's Included

The kit includes everything needed to install and operate the GrassFlap® brand chute blocker.

This includes:

• All steel flap assembly to mount to discharge opening
• 5L pedal (10-99-41)
• 70" cable (10-99-07)
• Wright no-drill mount (A4)
• Short angles for no-drill mount (A37)
• Mounting hardware for installation

The 5L pedal has the cable exit the pedal parallel to mounting surface.

Installation

Direct bolt to existing holes on deck and foot platform - no drilling required for aero-core deck with scalloped rib.

44WM INSTALLATION GUIDE

Aerocore deck with straight rib (shown below) requires drilling holes in rib rather than deck.