About This

• 200 Watts Aquarium Heater for 30-40 Gallon Fish Tank : Made of TA2 Aviation Titanium Alloy, the 200W aquarium heater is suitable for 30 to 40 gallon marine,saltwater and freshwater fish tank.The heater voltage 110-120V/60HZ, power 50W,US three-pin plug, heater length 7.09 inch,power cord is 4.82+1.31feet.The aquarium heater comes with 2 strong suction cups,1 temperature probe with 1 suction cup,1 controller.
• Rapid Heating & Safe & Durable : The heater rod made of anti-corrosion TA2 Aviation Titanium Alloy,the most stable nickel-chromium wire and anti-explosion quartz glass heating element,covered by teflon, not only can quickly and stably conduct heat to the surroundings,but also more safer for your fish.Longer service life and longer heating function.Suitable for Fresh Water and Marine Water.
• Temperature Calibration Function : When the tempeture of the controller is different from the temperature of the external thermometer, can be calibrated by pressing "+""-" keys at the same time. This function can help you set temperature more accurately and let the heater work better, so that your fish can live in the more suitable water temperature.
• Overheating Protection & Constant Temperature : Temperature adjustable range: 68℉-90℉, Accuracy：+-1℉.When the water temp is over 95℉-97℉,the heater will automatically stop heating and the controller will flash E2 fault code.When the water temp cool down to 90℉,the heater will start working automatically.When the water temp is 1-2℉ lower than the set temp,the red light on and it will start heating.hygger heater will always maintain the comfortable temperature for your beloved fish!
• Temperature Probe & Digital Display Controller : Accurate external temperature probe and temperature controller, you do not need to reach into the fish tank to adjust the water temperature, both safe and convenient operation.The controller digit display will show the current water temp and the set temp. To set the temp, just press the set button and then press"+" or "-" until the screen displaying the temp you desired, the setting is done and then screen will show the current water temp again.