SKU: 73124137537

WQ Magnetic Sanding Block

$9.00 $10.00
Save 10%
No.2 Bestseller on ifjpjournal.org >

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 14 - Jul 19

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

WQ Magnetic Sanding BlockWQ Magnetic Sanding Block Precision Block for Tolcut Mini Squares Overview The WQ Magnetic Sanding Block is built for technicians who need tight control during the final stages of PDR finishing. Sized precisely for Tolcut mini abrasive squares, this lightweight block gives you a clean, cushioned sanding feel that helps refine texture, soften orange peel, flatten nibs, and polish out small irregularities after glue pulling or knockdown work. The foam

WQ Magnetic Sanding Block | Precision Block for Tolcut Mini Squares

Overview

The WQ Magnetic Sanding Block is built for technicians who need tight control during the final stages of PDR finishing. Sized precisely for Tolcut mini abrasive squares, this lightweight block gives you a clean, cushioned sanding feel that helps refine texture, soften orange peel, flatten nibs, and polish out small irregularities after glue pulling or knockdown work.

The foam base keeps the block gentle on the surface while still giving you enough bite to level high spots with accuracy. With a magnet built into the back, you can place the block on steel panels, carts, or tool trays so it stays within reach during busy workflows. The bright backing makes the tool easy to spot in dim interiors or crowded shop bays.

Detailed Features and Benefits

Fits Tolcut Mini Squares

The top surface is cut to fit Tolcut mini squares with a clean, snug hold. This gives you quick swap convenience with no slipping, letting you work through different grits with steady control.

Foam Backing for Soft, Controlled Cutting

The foam base delivers a cushioned, uniform sanding feel that helps keep your finish smooth. It prevents harsh gouging and supports precise surface leveling during detailed repair stages.

Built In Magnet for On Panel Storage

The magnet on the back lets you stick the block onto any steel panel, tool cart, hood brace, or workstation. This keeps it close by and prevents the tool from getting lost during a repair.

High Visibility Body

Available in Green or Red, the sanding block stands out inside dark cabins, under dashboards, or across busy shop floors. The visibility helps you locate the tool fast during large panel work.

Ideal for Final PDR Finishing

Use it to refine pressure marks, texture changes, minor peel, and subtle highs left after blending or glue pulling. The block supports clean surface finishing before polishing.

Professional Use Case Scenarios

Glue Pull Cleanup

After removing glue or lowering crowns, use the block to clean minor texture shifts and flatten tight spots before polishing.

Retail Dent Finishing

For door dings, fender dents, or trunk repairs, the block helps you level small high areas without pushing too far into the surface.

Hail Repair Workflows

In high volume hail jobs, the magnetic storage keeps the block close for fast cleanup between pulls.

Interior and Trim Area Refinement

The bright color makes the block easy to locate inside cabins or tight work zones where tools are easy to misplace.

Comparison to Other Sanding Blocks

Standard blocks can be too firm, causing uneven cutting or accidental scratches. The WQ Magnetic Sanding Block uses a foam base that keeps the cut smooth and consistent.

Most small blocks do not include built in magnetic storage. This feature helps reduce downtime and prevents the tool from getting lost during busy repairs.

Generic blocks rarely fit Tolcut squares correctly. This block is shaped to hold them securely, improving accuracy and reducing waste.

Why Choose WilleyQuick

WilleyQuick builds tools that support clean workflow, tight control, and pro level finishing. The WQ Magnetic Sanding Block fits into the full WilleyQuick system of blending tools, knockdowns, trays, and magnetic accessories. It is made for technicians who want reliable access, clean sanding control, and strong finishing results on every job.

What’s Included

  • (1) WQ Magnetic Sanding Block in Green or Red

  • (2) 2500 grit Tolcut mini squares

Maintenance and Care Guide

Keep the block clean by brushing off dust after each use.
Inspect the foam surface for wear and replace if it loses shape.
Check the magnet for metal shavings to keep the hold clean.
Store the block in a dry area when not in use.

Proper care helps maintain smooth sanding performance.

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 73124137537

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.3 ★★★★★
Based on 2354 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
J
Verified Purchase
Jenna Rose
Lexington, US
★★★★★ 5
Magic!!!
I am no tech expert but these little guys are magic! We had just put in a wall of built-ins and desperately wanted to hide our cable box behind a cabinet, but with it being infrared this would not work without these little repeaters! First off I just have to say that the Sewell customer service is off the charts. You actually get to speak to a real person right away, no annoying menu after menu trying to get help. They helped us so much when we hit a couple snags. Here are a couple things that I figured out that I hope will help others. First you can hide both of these little discs, they both come with tiny little eyes that can attach to your tv and cable box or whatever you are trying to use them for, and they are nearly invisible. Second, don’t get nervous when you plug them into the power outlet and the lights don’t come on, this is ok and they aren’t supposed to stay on, they kind of blink here and there, and only when you use your remote. Third, we have an Altice One cable box (not the mini, just a regular cable box) and it was impossible to find the eye to attach the emitter’s eye (Side note: we had to put the emitter disc on top of the cable box because we couldn’t fit the emitter disc pointing in front of cable box. The directions give you both options though and you can basically put it anywhere as long as the eyes attach). The phone trick did not work on this particular cable box. But after trying about a dozen different spots on the front of the box we finally got it to work by putting the eye right on where the digital clock numbers are. I put it basically right on top of the colon (:). Cable vision was no help with this so I hope this can save others from our frustration. After we found the eye everything came together and worked perfectly! No more do we need to keep the cabinet open to change channels… it’s a miracle!!! Hope these little guys work forever.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 22, 2022
A
Verified Purchase
Amazonian
Phoenix, US
★★★★★ 4
Good product, expensive price, poor adhesive
Premium packaging for a premium device. Useful for IR remote signal delivery with extra functions on the side. Price though is luxury for it’s use. Used this for a Logitech Harmony hub control of an non-smart electric fireplace. Setup is a breeze but only if you’re tech savvy. Highly recommend to watch the YouTube video for information on all it’s application. There a many other cheaper devices similar to this available on Amazon that I could have used for the same application. If you have a need for multiple control within the same vicinity of other devices, this may be more useful for you. However, if you plan on utilizing an IR repeater/extender for only a single device and would like to save some money, don’t buy this one. This device works quite well though. Have had no issues achieving the effect needed. Only four stars due to the poor adhesive on the emitter attachment. As stated earlier, I used this on an electric fireplace with a glass surface. I used the attachable emitter to the front glass sensor where the IR receiver was located on the fireplace. After only one day, the emitter attachment fell off even though I made sure the glass was thoroughly cleaned prior to adhering it. Otherwise a good product.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 8, 2019
J
Verified Purchase
James P. Karl
Waukegan, US
★★★★★ 5
Denon avr ir remote port works great with sewell products
I bought a new entertainment center with glass doors and wasn't getting good signal range with the door closed. Plus i couldnt get a good of line site, since this cabinet was shorter than the orginal, and the location for my avr was further to the left than before and now my line of sight to the receiver was blocked from other parts of the room due to high couch back. I tried a couple different cheap $10 devices that used stick on transmitters/receiver buttons but they were clumsy and didn't provide me a total solution for my room layout. Works fantastic with a denon x1800 receiver (and many other models). It works directly with the denon's ir remote port in the back of the avr port. The solution is actually quite simple. Plug a stereo 3.5 mm male to male plug in the denon ir port in the back of the avr and and the other end to the orange emitter box(puck). The pics are about the size of an oreo double stuff cookie Tuck the orange box/puck away whereever and plug the power in. The box doesn't need to seen or be pointed towards anything. It's location is only limited by the length of your stereo cable and access to AC power Put the blue box puck anywhere in the room where you have general line of sight to it from where you will be using your remote, and plug power in. In my case, its sitting on top of one of my tower speakers. From there it clears the back of the couch and can see from the family room, eat-in kitchen area, and the kitchen beyond. Done. I didn't need or use any of the included emitter or transmitter cables, though if you dont have a denon, or other brand avr with an ir port to plug into , or also want to hide the blue puck ( in which case attach the included sensor cable), you'll need them. But for denon users with an ir port, you just use the two pucks and their usb power adapters. Simple.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 17, 2026
T
Verified Purchase
Tjaltz316
Boise, US
★★★★★ 1
Worked good then died at six months (Updated)
Worked good for a couple of months, then started to develop a lag between when you pressed a button on the remote, and when the TV would respond. If I moved the speaker blocking the TV’s IR receiver, and pointed the remote at it, it worked perfectly. Add the IR blaster back in and the delay returns. The delay kept getting longer and longer, sometimes 5 to 10 seconds. Then it just died. Would not pass any IR signals, even though the receiver and emitter both had power. Tried rebooting, changing communication channels to no avail. Out of Amazon return window. Manufacturer wants you do go through a troubleshooting process for warranty that is too complicated and time consuming. Customer Service Rep at Sewell send me a warranty replacement.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 21, 2025
J
Verified Purchase
Jack & Ann Kenny
Battle Creek, US
★★★★★ 5
Nice Product and Customer Service
I ordered this BlastIR Wireless Pro IR Repeater from Sewell to replace a wired version of an IR repeater from another company. We have moved our TV on to a wall location and are in the process of hiding all the wiring out of sight behind walls and/or in a cabinet. We still have some wires to go, but this product has enabled us to eliminate the IR wiring all together. It's a real improvement in both looks and performance over the cheaper, wired version we originally tried. The BlasterIR's Receiver is the component that faces the room and receives the IR signal from our remote controls. It's small enough to fit in the space between our sound bar and the bottom of the TV. It's range is great for our room size (about 22' long and 18' wide) and picks up the remotes signal from a side angle that's almost parallel to the TV itself. The receiver is powered through one of the USB ports integrated into the TV (although the device itself supports either a USB or regular plug-in option). I haven't used them yet but Sewell appears to have provided a few options to help with affixing the IR devices in their final positions including some adhesive pads and a magnetic pad option as well. I'm still playing around with the permanent placement of the IR Blaster Emitter. It sits inside a closed cabinet and faces the concealed cable box receiver, router and DVR components. It retransmits the various IR signals it receives from the IR receiver by blasting that signal to anything it faces. I just placed it in the cabinet about 5" away from the devices I wanted to control, plugged it in and it worked with no other set up. So far the BlastIR is working seamlessly and with much better function response time than the cheaper IR version we'd tried at first. The lag time between when a button is pressed on the remote control and the action taking place on the device I'm communicating with is minimal. The emitter itself is plugged into an outlet on a surge protector powering the other in-cabinet devices, although it too could be powered via the provided USB connection if desired. As a note, we did experience a shipping issue during our ordering process. The order it self was processed quickly and shipped in a timely manner. However, there was an issue with our actual receipt of the product and the USPS who reported it delivered to our mailbox when in fact it had not been. Regardless, we reached out to Sewell directly and they quickly resolved the issue for us with no problems and in a timely manner. I would recommend both this IR Blaster Pro product as well as Sewell as a trusted company itself.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 8, 2021

recommand products

University of Tampa Womens Jersey Racerback Tank
23.95
TAG | Heavy Duty Towbar | Ford Ranger & VW Amarok Cab Chassis PY NF 2022–ON | T7F841
290.00
TAG | Heavy Duty Towbar & Direct Fit Wiring Kit | Haval Jolion SUV (01/2021–05/2024) Petrol Only | T4G873-K201
492.00
Midd South Hockey Youth Fan Favorite Fleece Pullover Hooded Sweatshirt
36.95
Midd South Hockey New Era French Terry Pullover Hoodie
55.95