Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 10 - Jul 15
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
Wavecom WCM-ET-809 Analogue Insulation and Continuity TesterOverview The Wavecom ET 809 is a robust analogue insulation and continuity tester designed for reliable, everyday use. It combines simple dial selection with a clear moving coil (taut band) display, making it a favourite for techs who want fast, no nonsense results on site. This battery powered tester provides straightforward selection and clearly marked scales for: Insulation Resistance Testing at 250V, 500V, and 1000V ranges Continuity Testing with
Overview
The Wavecom ET-809 is a robust analogue insulation and continuity tester designed for reliable, everyday use. It combines simple dial selection with a clear moving-coil (taut band) display, making it a favourite for techs who want fast, no-nonsense results on site.
This battery-powered tester provides straightforward selection and clearly marked scales for:
- Insulation Resistance Testing at 250V, 500V, and 1000V ranges
- Continuity Testing with low-ohms 3Ω and 500Ω ranges
- AC Voltage presence indication to warn of live circuits
The ET-809 delivers quick, accurate readings and practical safety touches including automatic safety discharge after tests, a live-circuit warning LED, and an audible buzzer. A push-and-turn locking switch supports hands-free measurements, and the onboard battery check keeps you confident in the field.
A dependable choice for electricians and service technicians needing consistent, no-fuss insulation and continuity testing at a very reasonable price.
Applications:
Suitable for insulation and continuity testing on installations or equipment.
Tests:
- Insulation resistance
- Continuity
- AC voltage presence / live-circuit warning
Features and Specifications:
Insulation Measurements:
- Test Voltages: 250V, 500V, 1000V DC (rated test voltage +10% on open circuit)
- Measuring Ranges: 0–100MΩ (250V), 0–200MΩ (500V), 0–400MΩ (1000V)
- Mid-Scale Values: 1MΩ (250V), 2MΩ (500V), 4MΩ (1000V)
- Scale Multiplier: ×1/2, ×1, ×2
- Accuracy: ±3% of indicated value
- Short-Circuit Test Current: approx. 1.3mA DC
- Automatic Safety Discharge: Enabled at the end of test
Continuity Measurements:
- Ranges: 3Ω, 500Ω
- Measuring Range: 0–3Ω, 0–500Ω
- Output Short-Circuit Current: approx. 205mA
- Accuracy: ±1.5% of scale length
AC Voltage / Live-Circuit Warning:
- Visual Warning (LED): activates at ≥90V DC or ≥70V AC
- Audible Warning (buzzer): beeps at ≥24V AC/DC
- Function: Displays AC mains presence for safety before testing
General Features:
- Taut band movement analogue meter
- Push & turn locking switch for hands-free testing
- Battery check (indicates good batteries 8–13V during 240mA load test)
- Fuse protection (0.5A, 250V)
- Durable carry case
Power & Physical:
- Power Source: 1.5V AA (SUM-3) × 8
- Dimensions: 175mm (L) × 85mm (W) × 75mm (D)
- Weight: ~650g
Included Accessories:
- ET-809 insulation & continuity tester
- Test leads
- Crocodile clip(s)
- Fuse (0.5A, 250V)
- Carry case
- Instruction manual
- Batteries
Standards & Calibration:
Supplied with a 12-month calibration certificate to Australian Standards.
Standard Warranty:
12 months
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.5 ★★★★★
Based on 405 reviews
Sort
Product Reviews
★★★★★ 4
Super helfpul in the summer
Pros:
Charging functionality supports fast wireless output.
Mount design integrates cleanly with dashboard appearance.
Cooling fan improves charging durability.
Works well with MagSafe alignment.
RGB lighting enhances visual look.
Strong suction
Easy to adjust to fit and manoeuvre
Cons:
Noise level from fan audible.
Installation alignment requires precision.
Lighting brightness distracting at night.
Value for money higher than basic mounts.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 18, 2026
★★★★★ 5
Coolest wireless charger design I've seen
I just gotta say that this is the coolest design for a wireless charger, looks kinda futuristic. Now how well does this work? Amazingly well and truly easy to use. It is adjustable, stable and much safer for everyone. I really like this charger.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 6, 2026
★★★★★ 3
Wow that light color ring is annoying
There is no way to turn this color light off. I don't even know why it has to have a light at all. I suppose it is to tell you it has power. But the light could have been something that momentarily turns on and then off as you place the phone on.
I'm a DIY'er and I'm going to find a way to take this apart and disable the light. I'll report back if I'm successful.
The good news is that this mount is identical to another one I have except for the magnet charging section. I'm talking it is identical down to the knobs and metal arm so it's generic in that sense. They only changed out the magnetic section. This type of mount holds well to the screen. The charging speed seemed adequate. Not terribly fast but not slow. Wirelessly charging is always slower than plugged in.
The supplied USB cable is braided and feels like quality.
See attached picture. This mount is not something you'll necessarily want to use every time you drive. Therefore the color ring is annoying.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 20, 2026
★★★★★ 5
SLEEK EXTENDABLE SCREEN MOUNT
HIGH SPEED TESLA MAGSAFE POWER
i picked this up for my Model 3 to see if the 25W Qi2.2 charging actually lives up to the hype during my daily work week.
✨ The CNC aluminum build is top notch and feels much more robust than the flimsy plastic mounts i have tested. It's a piece of cake to clamp onto the corner of the Tesla screen and the metal arm matches the interior aesthetics perfectly. The magnetic hold is strong enough to keep my phone secure even when i am taking sharp turns thru my weekend adventures.
✨ Performance is where this thing shines because it actually delivers the 25W speeds without overheating. The built in cooling fan is a smart design choice that keeps the temperature down during long drives. i can hear the fan if the music is off but it's barely noticeable and definitely worth it for the consistent charging speed.
✨ The RGB lighting adds a subtle glow that makes it easy to find the mount in the dark without being distracting. Having the extendable arm is a big benefit for finding the perfect line of sight without blocking the main touchscreen. It's clearly a well thought out solution for any Tesla owner who wants a professional grade charging setup.
THE VERDICT
This is a exceptional piece of hardware that delivers real world results for high speed charging. The combination of active cooling and a sturdy metal build makes it a first class addition to my car.
'As a 35 year veteran of the computer technology industry, I offer informed and experienced perspectives in my product reviews.'
I will update this review if anything changes within 1 year.
★★★★★ (5 Stars): A 5 star rating indicates the product meets my expectations for its purpose.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 13, 2026
★★★★★ 5
Great Product!!!
Color: Black
**Overall impression**
The Anker MagSafe Charger Compatible, MagGo 3-in-1 is a seamless blend of practicality and modern design. It’s compact enough for a nightstand or desk, yet versatile enough to handle multiple devices in one tidy setup. If you value cable-free convenience and a tidy charging solution, this is a standout choice.
**What I liked**
- **Strong MagSafe performance**: The magnetic alignment feels precise, snapping right into place on my iPhone 13/14/15 with reassuring stability. Wireless charging is quick and steady, even with a case on (I tested a standard silicone case and a slightly thicker one).
- **3-in-1 convenience**: It’s not just a charger for your phone—the MagGo 3-in-1 includes a dedicated spot for AirPods or other wireless earbuds and a small stand for Apple Watch or another device, depending on your setup. This eliminates clutter and keeps essentials within arm’s reach.
- **Sleek, minimal design**: The matte finish and low-profile footprint look great on a nightstand or desk. It blends in with most decor and doesn’t draw unwanted attention to the charging area.
**Build quality**: Solid construction with quality materials. The stand holds devices steadily, and the cable management is thoughtful, helping to reduce cable chaos.
**Ease of use**: Set up is straightforward—just plug in, place devices, and you’re charging. The integrated design means fewer cables and an cleaner surface.
**Bottom line**
If you’re after a convenient, stylish, all-in-one charging solution, the Anker MagSafe Charger Compatible, MagGo 3-in-1 delivers. It’s reliable, well-built, and surprisingly versatile, making it a strong upgrade over standard single-device chargers. The few caveats around ultra-thick cases and watch-fit are minor trade-offs for the convenience and organization it brings to your space.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 25, 2026
recommand products
Schaum's Outline of Physics for Engineering and Science, Fourth Edition
25.50
McGraw-Hill Education Trigonometry Review and Workbook
12.75
Learning Oriented Assessment: A Systemic Approach
79.48
Spider-Geddon
21.24
Joyrapt Dance Mat For Kids 4-8 Ages, 6 Light-Up Buttons Bluetooth Dance Mat Girls Toys For 8-10, 7 Game Modes Birthday For Teen
33.80