Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 10 - Jul 15
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
Galaxy Note 9 Heavy Duty Aluminum Case | Red Pepper CasesHeavy Duty Aluminum Protection That Means Business When a slim TPU case isn't enough, the Red Pepper Cases Galaxy Note 9 Heavy Duty Aluminum Case steps up. CNC machined from aerospace grade aluminum alloy, this rigid bumper wraps the perimeter of your Note 9 in metal armor while a TPU inner liner absorbs drop energy before it reaches your screen. Whether you work in construction, field service, or just need a case that survives anything your day
Heavy-Duty Aluminum Protection That Means Business
When a slim TPU case isn't enough, the Red Pepper Cases Galaxy Note 9 Heavy Duty Aluminum Case steps up. CNC-machined from aerospace-grade aluminum alloy, this rigid bumper wraps the perimeter of your Note 9 in metal armor while a TPU inner liner absorbs drop energy before it reaches your screen. Whether you work in construction, field service, or just need a case that survives anything your day throws at it, this is it. Browse our full lineup of Galaxy Note 9 Cases to compare every protection level we offer.
10 Key Features
- Aerospace-Grade Aluminum Frame — 1.2 mm thick 6061 aluminum alloy bumper with anodized finish resists corrosion, scratches, and daily wear indefinitely.
- Dual-Layer Protection — Rigid aluminum outer bumper + soft TPU inner liner work together to disperse and absorb shock energy from drops up to 2 m.
- CNC-Precision Machined — Each bumper is CNC-machined to Galaxy Note 9 tolerances within ±0.1 mm for a gap-free, rattle-free fit.
- Anodized Finish — Type II anodizing adds a 5–25 micron oxide layer that is harder than steel and prevents fading, flaking, or oxidation.
- Full Button Access — Individually machined metal button covers for power and volume provide tactile click-through feedback better than most TPU covers.
- S Pen Slot Maintained — Precision cutout preserves full S Pen ejection and re-insertion without case removal.
- Speaker and Port Cutouts — Acoustically optimized speaker grille openings maintain full audio output; USB-C and headphone jacks fully accessible.
- Qi Wireless Charging Compatible — Open back design preserves Samsung 12W Fast Wireless Charging pass-through.
- Built-In Screen Lip — 1 mm raised front lip keeps the display off flat surfaces to prevent face-down scratches.
- Multiple Color Finishes — Available in anodized Red, Black, Silver, Blue, and Gold to match any personal style.
Material Specifications
The case combines two engineered materials for maximum protection without unnecessary weight.
- Outer Bumper: 6061 Aluminum Alloy, 1.2 mm wall thickness
- Surface Finish: Type II Anodize, 5–25 micron oxide layer
- Inner Liner: TPU (Shore 80A), 0.8 mm, anti-shock cushioning
- Total Added Weight: Approximately 28–32 g depending on color
- Bumper Height: 6 mm from phone edge on all sides
- Temperature Stability: Aluminum stable to 150°C; TPU liner stable to 65°C
5 Real-World Use Cases
- Construction & Field Work: Job sites, tools, and concrete floors are no match for a 1.2 mm aluminum perimeter. The anodized finish handles sawdust, oil, and the grit of an active job site.
- Outdoor Adventure: Hiking, mountain biking, or kayaking—the aluminum bumper protects against rock impacts and trail drops that destroy standard plastic cases.
- Motorcycle Riding: Vibration-damping TPU liner absorbs engine vibration that causes gradual internal phone damage; the rigid outer frame handles tank drops.
- Industrial Operations: Chemical-resistant aluminum handles exposure to light oils, cleaning solvents, and industrial environments where TPU degrades.
- Security Professional: A case that looks serious and IS serious—the solid aluminum frame projects authority while protecting a $700+ device on the job.
Feature vs. Benefit
| Feature | Benefit to You |
|---|---|
| 6061 aluminum alloy frame | Outlasts the phone itself—no cracking, crumbling, or peeling after years of use |
| TPU inner shock liner | Drop energy absorbed before it reaches the screen and internal components |
| CNC machined tolerances (±0.1 mm) | Zero rattle, zero gaps—case stays tight for the full life of the phone |
| Type II anodized surface | Scratch-resistant surface harder than standard stainless steel |
| Metal button covers | Tactile, positive-click feel superior to rubbery covers on plastic cases |
| Open back design | Full wireless charging and full heat dissipation from the phone body |
Installation Guide
- Separate the bumper: If the aluminum bumper has a removable inner section, unscrew or unclip the retention screws (1–2 Phillips screws, if present).
- Insert the TPU liner: Seat the soft TPU inner liner into the aluminum channel—it should sit flush on all sides.
- Lower the phone in: Lay the phone face-up onto the liner, aligning all corners, the S Pen slot, and the camera cutout.
- Secure the frame: Press the outer aluminum bumper down around all four sides until it clicks or locks into the liner.
- Fasten any screws: If retention screws are present, tighten gently with the included precision screwdriver—do not over-tighten.
- Verify: Check button travel, S Pen ejection, USB-C port access, and camera alignment before use.
Full installation: approximately 60–90 seconds.
Troubleshooting
- Bumper feels tight to install? New aluminum frames have tight tolerances. Gentle, even pressure on all sides simultaneously eases the fit without scratching the phone.
- Buttons don't click clearly? Check that the TPU inner liner is fully seated—a partially seated liner shifts the button cover position by 0.5–1 mm, reducing travel.
- Wireless charging reduced? Ensure no metal debris or coins are trapped between the phone and the TPU liner. Clean with compressed air and re-seat.
- Anodized finish scratched? Light surface scratches on anodized aluminum are cosmetic and do not affect protection. Deep gouges can be treated with aluminum-safe polish.
- Rattling sound? Tighten retention screws if present. If rattle persists, a thin strip of 0.2 mm foam tape on the TPU liner contact surface eliminates it without affecting fit.
Frequently Asked Questions
Q: Does this fit the Galaxy Note 9 with its stock battery cover?
A: Yes. The case is designed for the standard Note 9 (SM-N960) chassis. Do not use with aftermarket battery covers that alter thickness by more than 0.3 mm.
Q: Is the aluminum real or powder-coated plastic?
A: The bumper frame is solid 6061 aluminum alloy. You can verify by weight (~28–32 g for the bumper alone) and the cold-to-touch feel of real metal.
Q: Will the metal case interfere with LTE or 5G signal?
A: The open-back bumper design leaves the antenna lines unobstructed. Signal reception is not degraded because the aluminum does not cover the antenna bands located on the Note 9 back and top/bottom edges.
Q: Does it work with wireless charging?
A: Yes. The open back passes Samsung 12W Fast Wireless Charging and 5W standard Qi without obstruction.
Q: How heavy is the case?
A: Approximately 28–32 g depending on the color finish. Total phone + case weight is approximately 229–233 g.
Q: Can I use a screen protector with this case?
A: Yes. The 1 mm raised front lip is compatible with standard 0.33 mm tempered glass screen protectors for the Note 9.
Q: Does the case include a screwdriver?
A: Yes—a precision Phillips screwdriver for the retention screws is included in the package.
Q: What colors are available?
A: Red, Black, Silver, Blue, and Gold anodized finishes. All offer identical protection levels.
Q: Is this compatible with magnetic car mounts?
A: Yes—the aluminum frame itself provides a natural magnetic surface for most magnetic car mounts without any additional metal plate needed.
Q: How long does shipping take?
A: Standard US delivery: 5–7 business days. Expedited 2-day options available at checkout.
Q: What is your return policy?
A: 30-day returns on unused items in original packaging. Full details at our Refund Policy page.
Q: Is this case TSA-friendly for air travel?
A: Yes. The aluminum frame will flag in a carry-on X-ray but is not a restricted item. It is identical in material to standard laptop frames and passes airport security routinely.
Q: Does the case fit in car mounts or dashboard holders?
A: Yes, if the mount accommodates a phone width of up to 78 mm (the standard Note 9 width plus ~6 mm of bumper on each side = ~90 mm total).
Q: Do you offer custom engraving?
A: We don't currently offer custom engraving. For product questions, visit our Contact page.
Q: Is the inner TPU liner replaceable?
A: The TPU liner is not sold separately, but the aluminum bumper is designed for long-term use—the liner typically outlasts the phone.
More from Red Pepper Cases
Need a different style for your Note 9? Browse all options in our Galaxy Note 9 Cases collection—from slim TPU to full waterproof protection.
See our blog for more: Metal Case Deep Dive and Best Galaxy Heavy Duty Cases 2026.
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy